A10VSO45DR/31R-PPA12N00 L10VSO45DFR1/31R-PPA12N00 AA10VSO45DR/31R-PPA12N00 A10VSO45DFLR/31R-PPA12N00 L10VSO140DFLR/31R-PPB12N00 German Rexroth Mechanical Piston Pump
hydraulic system | high pressure | electric | cast iron | construction machinery |
hydraulic oil | variable | vertical | Rexroth | plunger pump | hydraulic | |
Edge standing | wooden box | nationwide | pipeline pump | Edge standing | plunger pump | |
Used in the mechanical industry | | | | |

A10V A10VSO45DFLR/31R-PPA12N00 |
SO45DFR1/31R-PPA12 |
A10VSO45DFR1/31R-PPA12N00-S1648 |
A10VSO45DFR1/31R-PPA12N00 |
A10VSO45DR/31R-PPA12 |
A10VSO45DR/31R-PPA12N00 |
A10VSO71 DFLR/31R-PPA12N00 |
A10VSO71/DFR1/31R-PPA12N00 |
A10VSO71DFR/31R-PPA12KB3 |
A10VSO71DFR1/31R-PPA12N00 |
A10VSO71DFR1/31R-VPA12N00 |
A10VSO71DFR1/32R-VP22U99S2184 |
A10VSO71DFR1/32R-VPB22U99 |
A10VSO71DR/31R-PPA12 |
A10VSO71DR/31R-PPA12N00 |
A10VSO71DRS/32R-VPB22U99 |
A10VSO100 DFLR/31R-PPA12N00 |
A10VSO100DFR1/31R-VPA12N00 |
A10VSO100DR/32R-VPB12N00 |
A10VSO100DRS/32R-VPB12N00 |
A10VSO100DRS/32R-VPB12N00-S1439 |
A10VSO100DFR1/31R-PPA12N00 |
A10VSO100DR/31R-PPA12N00 |
A10VSO100DR/52R-PPA14N00 |
A10VSO100DRG/52R PUC64N00 |
FAQ;
- What is the application range of the A10VSO series?
- The A10VSO series is a variable - displacement axial - piston pump with a swash - plate design, mainly used for hydrostatic transmissions in open - loop circuits, and is widely applied in industrial hydraulic systems.
- What are the main specifications of the A10VSO series?
- The A10VSO series has specifications including A10VSO10, A10VSO18, A10VSO28, A10VSO45, A10VSO71, A10VSO100, and A10VSO140. Its rated pressure can reach up to 280 bar, and the peak pressure can reach 350 bar.
- What should be paid attention to during the installation of the A10VSO series pump?
- The pump and the motor should be installed concentrically to avoid increasing the radial load on the pump. The installation bolts should be tightened to prevent looseness, which may lead to vibration and noise.
- For self - priming pumps, the oil level in the hydraulic tank should not be lower than the lower limit of the oil level gauge to ensure sufficient oil supply.
- How to adjust the flow of the A10VSO series pump?
- The flow of the A10VSO series pump is proportional to the drive speed and displacement. By adjusting the position of the swash plate, that is, adjusting the variable piston to change the swash - plate angle, the output flow of the pump can be smoothly adjusted.